12
Basic Operation
Standby/ON
When you first connect the main unit to the mains socket, the main unit will be in Standby mode.
• Press the button on the unit or on the remote control to switch the unit ON.
• Press the button again to switch the unit back to STANDBY mode.
• Disconnect the mains plug from the mains socket if you want to switch the unit OFF completely.
- If a TV or an external device is connected, the unit will switch on automatically when the TV or the
external device is switched on.
- When there is no input signal from the unit in over 15 minutes, then it will automatically switch to
Standby mode.
Select Modes
Press the
(SOURCE)
button repeatedly on the unit or the
SOURCE
,
HDMI
buttons on the remote
control to select the
AUX
,
OPTICAL
,
COAXIAL, HDMI 1, HDMI 2, HDMI ARC, USB
and
BT
(Bluetooth)
mode. The selected mode will show on the display.
Adjust the Bass Level
• Press the
BASS
button on the remote control to activate bass setup, then press the
VOL+/-
button to
adjust the bass level (bass +5 ~ bass -5).
Turn the Surround Sound
ON/OFF
• Press the
SURROUND
button on the remote control to turn on the surround sound. Press this button
again to turn off the surround sound.
Adjust the Volume
- Press the
VOL+ / VOL-
buttons on the unit or on the remote control to adjust the volume.
- If you wish to turn the sound off, press the
MUTE
button on the remote control. Press the
MUTE
button again or press the
VOL+ / VOL-
buttons on the unit or on the remote control to resume
normal listening.
Adjust the Brightness
-
Press the
DIMMER
button on the remote control to select brightness level.
Select a Preset Sound Effect
• While playing, press the
EQ
button on the remote control to select desired preset equalisers:
Movie
(recommended for viewing movies),
Music
(recommended for listening to music),
NEWS
(recommended for listening to NEWS).
