- 5 -
STEP 4
C
x 8PCS
1
4
ASSEMBLY STEPS
STEP 3
2
3
8
5
6
7
F
x 2PCS
B
x 2PCS
1-
Slide
the back board
(8) into the
grooves
of
the
supports
(2
,
3
,
& 5
)
.
2-
Insert
1
cam lock
on the right side of each of the supports (2&3) into the appropriate hole
.
3-
Insert shelf holder (F) into the designated holes on the shelf (7) shown in figure below.
4-
Attach the shelf (7) into the frame by attaching the right support (6) into the assembly. This could
be done by insert
ing the cam blots of support (6) to the cam bolt holes on supports (2&3) while
ensuring that the shelf holders (F) are also inserted into their appropriate holes.
5- Rotate cam locks (B) clock wise to secure cam bolts (A) in place.
1-
Attach
board (1) to the
top side of the assembly by inserting 4 screws (C) into their designated
holes on board 1 and tightening them to the assembly
.
2
- Repeat the step above
for support (4
)
attaching it to
the assembly from the bottom side.
