4
Pull stakes from the ground, lower arm to the shortest po-
sition, swing arm toward the vehicle, and snap the patio
foot into the bracket. Repeat for other side and proceed to
next step.
Ensure that the lock is in the “roll-down” position prior
to swinging arms toward vehicle. Failure to do so can
cause damage to the lock mechanism.
CAUTION
Raise the lift handle to release the lock button. Lower main
arm to the stop plug. Swing the handle down to engage the
lock button in a hole. Repeat for other side.
A:
Loosen black adjustment knob. B: Lift slider catch.
2. TO CLOSE AWNING:
A. Unlock Hardware.
B. Lower Hardware.
C. Rafter Unlocking.
C:
Slide the rafter arm down to the bottom of the main arm.
Leave black adjustment knob loose. Repeat for other side.
Grasp the pull strap, pull toward you, and flip the locking
lever up to the ROLL UP position.
Do not release the awning pull strap now. It is under
tension and could snap back against the vehicle side.
Slide the pull strap to the center, and using it to control
speed, allow the awning to return to the vehicle side.
Note: Allow the strap to wind diagonally to prevent a bulge
in the fabric.
D. Roll up FRTA.
CAUTION
