E-8
Start Measuring
Weight Only Operation
Your TRANSTEK Body Scale will operate as a conventional weight – reading
scale. No special programming steps are required.
Once the scale is initialized, as previously described, you may simply step on the
scale to measure your current weight. For only weight reading.
1. Position the scale on a flat, hard surface. Carpeted or uneven floors may affect
accuracy.
2. Step onto the scale platform and remain still while the scale computes your
weight.
3. Step off and the scale will display your weight value.
4. The scale will automatically turn off after a few seconds.
Note: The weight value won’t be saved in the scale, and won’t be transmitted to the APP.
Setting the User ID and Start Measuring
Assigning User ID
• With batteries correctly installed, press “SET” button to enter setting. Or when
the LCD displays 0.0, press and hold “SET” button for about 3s to enter setting
mode.
• As pictured below,“P1” blinks. The operator may press the function button
or
to select User ID among P1 to P8.
• Press “SET” button to confirm User ID.