background image

Specifications

Measuring method

Electric resistance

Digital display

Liquid crystal display, 18 mm character height

Maximum capacity (MAX) 150 kg

Minimum display (d)

0.05 kg

Power source

Four type AA batteries (R6P, 1.5 volt x 4)

Battery life

Approximately 2000 measurements

Dimensions

210 (D) x 295 (W) x 40 (H) mm

Weight

Approx. 1.7 kg, including the batteries

Accessories

Instruction manual, add-on feet (4), batteries (4)

Specifications are subject to change without prior notice and any obligation

on the part of the manufacturer.

Before Requesting Service

How to Dispose of the Scale

Follow the local regulations when disposing of the scale.

Symptoms
Nothing is displayed by pressing the

ON/OFF switch.
The display remains flashing or is

fixed to the display - - - - - .

E-0 appears. H or L remains displayed.
The difference between an estimated

weight and a measured weight is bigger.

Corrective action
Check the battery installation.

Replace all four batteries with new ones.
Is anything touching the scale?

Is there anything under the scale?

Remove and reinstall the batteries.
Place the scale on a solid and level surface.

When the scale is placed on a carpet,

use the add-on feet.

Is there anything under the scale?

Содержание UC-322













Отзывы: