A&D UA-779, Инструкция по эксплуатации

Страница: 8 / 43

ENGLISH 7
Measurements
• Remain still while the device is in operation.
• When a measurement is made with insufficient pressure, the device will
pump again to a higher pressure.
• If necessary, the starting pressure can be set manually. Press the
START/STOP switch and hold it down until the display shows a pressure
30-40 mmHg above your normal systolic blood pressure, then release the
switch. The device will start the measurement from that pressure.
4. When measurement has completed, the systolic pressure, diastolic pressure
readings, and the pulse rate are displayed. The air is automatically released
from the cuff.
5. Turning the Power OFF
Press the START/STOP switch to turn the power off.
6. Subsequent Measurements
If a subsequent measurement is required, turn off the power and turn it on
again. When the "0" is displayed, the device is ready for measurement again.
Note: Please wait for about 10 minutes before repeating the
measurement.
7. Automatic Power OFF Function
If this device is left on after a measurement, it will turn itself off after about 1
minute. It may be turned off at any time by pressing the START/STOP switch.
Systolic Display
Diastolic Display
Pulse Display