![background image](http://html2.mh-extra.com/html/aandd/ua-774/ua-774_instruction-manual_3114477012.webp)
E-9
The memory function on the UA-774 blood pressure monitor is
designed for two people. For each START button, the monitor can
store up to 30 readings in memory. To keep track of previous
measurements accurately, we recommend that you use the same
START button each time you take a blood pressure reading.
To recall previous measurements in memory, press
and hold the START 1 or START 2 button. Your
average blood pressure reading will appear with the
number of measurements taken flashing three times.
Release the button after the display switches to the
memory index number (see illustration on right).
The previous measurements are displayed from most recent to
oldest. When viewing previous measurements, you will see the "M"
symbol appear on the upper left corner of this display. You can stop
measurements by pressing either START button again.
NOTE: Memory will be lost if batteries become low or are removed.
The UA-774 provides an average blood pressure
reading based on the measurements stored in
memory. When the monitor is turned on, the average
blood pressure reading will appear with the number
of measurements stored in memory flashing three
times. The START 1 button will provide the average
reading for User 1 and the START 2 button will
provide the average reading for User 2.
In Canada (Toll-Free): 1-800-463-5414
ABOUT AVERAGE READING
ABOUT MEMORY
NUMBER OF
MEASUREMENTS
STORED IN MEMORY
AVERAGE