A&D UA-705, Инструкция по эксплуатации

Страница: 5 / 14

English 4
Symbols
Symbols Function / Meaning Recommended Action
Standby and ON switch.
Battery installation guide
SN
Serial number
Date of manufacture
Type BF: Device, cuff and tubing are
designed to provide special protection
against electrical shocks.
The indicator that appears while
measurement is in progress. It blinks
when the pulse is detected.
Measurement is in
progress. Remain as still
as possible.
I rregular H eart b eat indicator. (I.H.B.)
The indicator that appears when an
irregular heartbeat or any excessive
body movement is detected during the
measurement.
Flashes when there is air remaining
in the cuff at power up.
Flashes at the completion of the
measurement until exhaust is complete.
Press the exhaust
valve button to
exhaust air from the
cuff.
Flashes when pressure is insufficient
for the measurement.
Pump air into the cuff
with the rubber bulb.
Previous measurements stored in
memory.
Full Battery
Indicates remaining battery power.
low Battery
Blinks when battery is low.
Replace battery with
new one when the
indicator blinks.
Unstable blood pressure due to
movement during the measurement.
Try the measurement again.
Remain very still during
the measurement.
The systolic and diastolic values are
within 10 mmHg of each other.
The pressure value did not increase
during inflation.
The cuff is not fastened correctly.
PUL. DISPLAY ERROR
The pulse is not detected correctly.
Check the air hose
connecter plug and cuff.
Fasten the cuff correctly,
and try the
measurement again.
EC directive medical device label
WEEE label