A&D UA-1200BLE, Инструкция по эксплуатации

Страница: 27 / 172

English 25
Troubleshooting
Symptom Probable Cause Treatment
Power
does not
turn on.
Low battery Charge the battery.
Blood Pressure monitor
internal error.
Press the Reset Switch.
Battery charging cable is
connected.
Remove the charging cable.
The cuff
does not
inflate.
Low Battery Charge the battery.
The device
does not
measure.
Readings
are too
high or too
low.
You moved your wrist or
body during measurement.
Make sure you remain still and quiet
during measurement.
If you have a very weak or irregular
heartbeat, the device may have
difficult in determining your blood
pressure.
The cuff position is not
correct.
Sit comfortably and still.
Place your arm on a table with your
palm facing upward and the wrist cuff
at the same level as your heart.
Other The value is different from
that measured at a clinic or
doctor’s office.
At a clinic or doctor’s office
apprehension may cause an
elevated reading. Home
measurement reduces the effects of
outside influences on blood
pressure readings, supplementing
the doctor’s readings.
Note: If the actions described above do not solve the problem, contact the
dealer. Do not attempt to open or repair this product, as any attempt to do
so will make your warranty invalid.