A&D SJ-3000WP-BT, Инструкция по эксплуатации

Страница: 21 / 48

19
Data format
S T , + 0 0 0 0 0 . 0 0 _ k g C
R
L
F
Header Data Unit Terminator

There are three kinds of headers for the weighing value as follows.
ST
：
Weighing data is stable.
US ： Weighing data is not satable.
OL
：
Data is over.(beyond the measurement range)

Data is always digits including sigh, decimal point.

There are three types of units as follows:
_ k g
：
Unit amount of weighing data
“
kg
”
_ _ g
：
Unit amount of weighing data
“
g
”
_ P C ： Unit amount of number “ PCS
”

C
R
L
F
is always output for the terminator.

Example of output data
Weighing data
“
kg
”
(
＋
) S T
, + 0 0 1 2 . 3 4 5 _ k g
C
R
L
F
Weighing data
“
g
”
(
－
) S T
, - 0 0 0 0 1 2 3 4 _ _ g
C
R
L
F
Overweight
“
kg
”
(
＋
) O L
, + 9 9 9 9 . 9 9 9 _ k g
C
R
L
F
10.3. Data output mode (
prt
) (refer to “12.FUNCTION
SETTINGS “).
Stream mode ( prt-0 )
Data is output continuously. Data output is abput 10 times per second.
Command mode ( prt-0
～
6 )
The scale is controlled by a command sent from a personal computer etc, connected
externally. For details, refer to "10-4. Command mode".
In
ptr-1 , data is output only by command.
Output by PRINT key ( prt-2 )
When the weighing value is stable (stable mark is lit), pressing the PRINT key will
output the data. The display will disappear for a moment to inform you that data has
been output.
Auto print +/- data ( prt-3 )
Data is output when the weighing value is stabilized (stability mark is lit) and its value
is +5d or greater, or -5d or smaller. The next output will be after the weighing value
has returned to the range of -4d to +4d.