3
PREPARATION
Installing Batteries
CAUTION
Take great care of the polarity of batteries. The polarity marks are
shown in the battery box.
Replace used batteries with four new ones when
lb
is displayed.
Do not mix used and new batteries. Do not mix the battery type.
Remove batteries when the scale is not to be used for a long time.
1 Slide the battery cover downward to open.
2 Push the battery box to unhook and pull it out.
3 Insert new four batteries (R20P / LR20 / D size) into the battery box, taking
extreme care of the polarities.
Batteries are not included with shipment.
Connecting an AC adapter (Optional)
The AC input requirement could be 100, 120 or
230 volts (50/60Hz) depending on the area where
used, so please verify that the adapter is correct.
Open the rubber cap and plug the AC adapter.
Setting up the Scale
Place the scale on the firm surface and adjust
the feet so that the sprit level shows the scale is
level for an accurate weighing.
AC adapter plug
Open rubber cap.
OK NG
1
2
3
Battery box
New four batteries
(R20P / LR20 / D size)
Battery cover
