A&D RA3100 Omniace, Инструкция по эксплуатации

Страница: 44 / 176

5.Trigger Setup - 5.1.Trigger Types
44 1WMPD4004444
5. Trigger Setup
5.1. Trigger Types
This product has two types of triggers:
Memory triggers for memory recording and Start triggers for starting recording.
5.2. Memory Trigger
Memory trigger is a signal for enabling memory recording, and is occurred when the trigger conditions of
the channel specified in the trigger source are established.
When a trigger is detected, memory recording is performed with the data count set in the pre-trigger and
memory block size, which represents a single recording operation. When the number of blocks to record
is set to a multiple number, recording starts for the next block when one block has finished recording.
Press START key End recording
Recording time
During record
Printer recording
SSD recording
Memory recording
Trigger occurred Trigger occurred Trigger occurred
5.2.1. Memory Trigger Setup
Step 1. Tap the CH key on the side menu to display the channel setup sub menu.
Step 2. Tap the Trigger tab on the bottom right of the channel setup sub menu to display the trigger
setup screen.
Step 1
Step 2