A&D GX-1603A, Руководство по связи

Страница: 21 / 41

GX-A Series/GF-A Series Communication Manual 21 / 41
By sending a specified command from a PC or a PLC to the balance, you can control the balance
such as by requesting weighing data, manipulating various keys and changing the setting value. To
send a command to the balance, add a terminator (<CR> <LF> or <CR> in the internal
setting ) to the command character string.
Commands to query weighing data
Command string Function
Q Requests the weighing data immediately
RW Requests the weighing data immediately
SI Requests the weighing data immediately
S Requests the weighing data when stabilized.
<ESC>P Requests the weighing data when stabilized.
SIR Requests the weighing data continuously. (Stream output)
C Cancels the S, <ESC>P or SIR command.
□ The Q, RW and SI commands behave the same.
□ The S and <ESC>P commands behave the same.
□ <ESC>
：
Escape code, ASCII:1Bh code
Key control commands
Command string Function
P Same as the ON:OFF key
ON Turns the display on.
OFF Turns the display off.
CAL Same as the CAL key : Calibration with built-in weight
（
GX-A Series
）
Calibration with a separate weight
（
GF-A Series
）
EXC
Calibration with a separate weight
（
GF-A Series
）
U Same as the MODE key
SMP Same as the SAMPLE key
PRT Same as the PRINT key
R Same as the RE-ZERO key
（
Semi-automatic zero point setting
）
Z Same as the RE-ZERO key
（
Semi-automatic zero point setting
）
RZ
Same as the RE-ZERO key
（
Semi-automatic zero point setting
）
T Tares the balance
TR Tares the balance
ZR Zero
（
Setting the zero point
）
□ The R, Z and RZ commands behave the same.
□ The T and TR commands behave the same.
8. Commands
8-1. Control commands