A&D FC-1000i, Инструкция по эксплуатации

Страница: 10 / 86

1-7. Last Unit Weight Used Feature
There are a number of ways to register a unit weight to count. The scale has a feature
to keep the last unit weight used in memory. This can be handy if you turn the scale
display off and then want to return to the same unit weight, or you accidentally clear
the unit weight by pressing the
RESET key.
When a unit weight is registered it is automatically placed in the ID “
id-000000
” and
remains there until a new unit weight is entered, or the power is disconnected. It can
be recalled by the following:
1. When three
UNIT WEIGHT BY LED’s are
blinking at display ON, or if the RESET key
has been pressed;
2. Press the
ID key.
"
id-000000
" will be displayed
with
Ñ
000000
Ò
blinking.
3. Press the
ENTER key.
The scale will recall the previous
unit weight.
Automatic Last Unit Weight Used
When you turn the display on, the scale can automatically recall the last unit weight
used from memory, if desired.
‰
Set the F-Function
f-01-04
at “
1
”. The scale will recall the last unit weight used,
when the display is turned ON.
ID.
STABL
. 8888810
881
pcs
W 2 W E I G H T ( k g )
1234561789 0.000 4578 id-000000
2 3 S A M U U W ( g )
12345670.00000
ZERO TOTAL M+
TARE
ENTERED
SCALE
. ------ 0
881
pcs
W 2 W E I G H T ( k g )
1234516--- 0.000 4568 id-000000
2 3 S A M A U U W ( g )
12345617 12.0000
ENTER
UNIT WEIGHT BY
8