A&D EK-1200i, Инструкция по эксплуатации

Страница: 27 / 47

25
q
The result of calibration (“Calibration report”)
q The result of calibration test (“Calibration test report”)
q The “Start block” and “End block” for GLP data
10-1. Setting the ID number
1. Press and hold the SAMPLE key to display
f unc
.
2. Press the SAMPLE key several times to display
i d .
3. Press the PRINT key. Enter the ID number using
the following keys.
SAMPLE key To select the digit blinking to
change.
RE-ZERO key To set the character of the digit
selected. See the table below for
the “display character set”.
PRINT key To store the value and proceed to
the next step.
MODE key To cancel the value and proceed
to the next step.
4. When the above operation has completed,
f unc
appears after end .
5. Press the MODE key to return to the weighing
mode.
Display character set
0 1 2 3 4 5 6 7 8 9 -
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
0 1 2 3 4 5 6 7 8 9 - a b C d e f g H i j k l m n o p q r s t U v w x y z
“ ” : Space
10-2. Output example
Data format for “calibration report”
Press
several times
f unc
i d
000000
end
Press and hold
f unc
Set using the
relevant keys
Returns to
the weighing mode
Press
several times