ADF-3200 Installation and Operation Guide
Date : DEC. 18th, 2013
- 17 -
3-4 STARTING & ENDING
3-4-1 SETTING
No deliberate adjustment is needed for standard use.
You have only to connect power source through DC(24V) adaptor from
AC power supply and connect RGB cable between RGB image in port
of vestView and RGB out port of projector. Then bestView ADF-3200 is
all standby to operator 3D images presentation.
3-4-2 STARTING
There is no on/off switch. The system start as soon as it is connected
to a power source. Ensure the 3D-filter of bestView ADF-3200 is positioned
directly in front of the lens of the projector and check the connecting of
RGB cable between RGB image in port of vestView and RGB out port
of projector. If you would play 3D images by computer or 3D blu-ray
disc player, the bestView ADF-3200 will start right away synchronized
with 3D images.
1. Set up the computer or blu-ray disc player and projector in waiting mode.
2. Check the RGB cable connection.
3. If 3D sync cable is in setting between projector and bestView, check
connection of the 3D sync cable exactly.
4. Check panel drive cable of RJ-11 connection.
5. Check and insert power plug into power terminal. Then you will see
the red LED on.
6. Set 3D-filter in front of the projector lens using L/R moving button or
“2” or “3” key of remote controller transmitter.
7. Start the 3D film from computer or 3D blu-ray disc player. If 3D image
plays correctly, you can find the green LED on.
8. If L/R shows reverted on the projector, use the L/R mode change
button(green) to correct the problem.
3-4-3 ENDING
1. If 3D image is stopped to play, bestView will stop operating 3D
mode automatically.
2. Move 3D-filter aslant of the projector lens to operate 2D mode.
3. Plug off the DC power adaptor or power off the AC power cord.