5. Preparation
5.1. Installing or Replacing Batteries
CAUTION
□
□
□
Batteries are not included. Please purchase them separately.
□
□
□
Insert the batteries in the correct polarity (+/-) as shown the battery compartment.
□
□
□
Replace all four batteries at the same time.
□
□
□
Be sure to install the battery cover when using the product.
□
□
□
Do not mix different types of batteries and new and old batteries.
□
□
□
Battery life depends on operating conditions and ambient temperature.
□
□
□
Remove the battery if it is not used for a long period of time or if it is used only for USB power supply.
1. Remove the battery cover.
2. Remove all old batteries.
3. Note the polarity of the four new AAA batteries when inserting them.
4. Install the battery cover.
5.2. USB Power Supply
Connect the USB cable to the USB (Micro-B) terminal on the side of the main unit.
CAUTION
□
□
□
The USB cable is not included.
□
□
□
Data transfer from the USB terminal is not possible.
□
□
□
Operation is not guaranteed with of all power supply units.
□
□
□
Check the specifications of the power supply unit.
□
□
□
Do not connect to a device other than a power supply. Connecting to other devices may cause damage.
□
□
□
When connecting a USB cable, check the direction of the connection and insert it straight.
5.3. Precautions for Use
CAUTION
□
□
□
The stands should be extender fully or not at all.
Do not use the product with the stands halfway out.
□
□
□
Be sure to extend both stands when standing the device.
□
□
□
Prevent foreign matter such as liquid or metal from getting into the body.
□
□
□
Do not handle the product with wet hands.
□
□
□
Do not press the keys with hard or sharp objects.
□
□
□
Do not install or store the product in an unstable location.
□
□
□
Be careful that the product does not fall or is impacted.
5V±0.5V / 50mA
USB (Micro B) Terminal
Approximately 20
°
Stand