A&D AD-8125, Инструкция по эксплуатации

Страница: 4 / 13

3
3. PREPARATION
3-1. The DIP Switch Functions
The DIP switch assembly for the settings is located on the base of the printer.
The switch assembly is protected by a white plastic cover. Open the cover with a
screwdriver.
DIP switches (Factory setting)
Before changing the DIP switch settings, be sure to turn the power off.
DIP Switch Settings
Baud rate between the printer and the scale
Switch No.
Speed
1
Comments
2400 bps OFF Factory setting
9600 bps ON
Label length
Switch No.
Length
2 3
Comments
34 mm OFF OFF Factory setting
40 mm ON OFF
46 mm OFF ON
UFC setting ON ON
Barcode data selection (Type of barcode is Code 39 only.)
Switch No.
Barcode data
4 5 6
Comments
No barcode OFF OFF OFF Factory setting
ID code (Header is ‘ID’) ON OFF OFF
Weight (Header is ‘WT’) OFF ON OFF
Quantity (Header is ‘QT’) ON ON OFF
Unit weight (Header is ‘UW’) OFF OFF ON
Tare (Header is ‘TR’) ON OFF ON
The barcode is printed in
the format that the FC-
i / S i
scale can accept.
Not in use OFF ON ON
Not in use ON ON ON
Data format
Switch No.
Data bit / Parity
10
Comments
7 bits / Even parity OFF
8 bits / Non parity ON Factory setting
Switch No.
Keep these switches as shown.
7 8 9
Comments
Internal use OFF OFF ON Factory setting
Please note that DIP switch No.10
is labeled as 0.