27
LAB-0123, 2004/07/01, 12:34:56, ST,+0000.1278,
~~
g<CR><LF>
CR LF
S T , + 0 0 0 . 1 2 7 8 ,
g
CR LF
O L , + 9 9 9 9 9 9 9 E + 1 9 ,
g
MT format
5if
type
3
This format is used when the peripheral equipment of other manufacturer is connected. Please
note that the connection is not guaranteed.
A header of two characters indicates the balance condition.
The polarity sign is used only for negative data.
The weighing data uses spaces in place of the leading zeros.
The character length of this format changes dependent upon the unit
NU (numerical) format
5if
type
4
This format outputs only numerical data.
This format consists of ten characters excluding the terminator.
The polarity sign is placed before the data with the leading zeros. If the data is zero, the plus sign
is used.
CSV format
5if
type
5
This format separates the data of A&D standard format and the unit by a comma ( , ).
This format outputs the unit even when the data is overloaded.
When a comma ( , ) is selected for the decimal point, the separators are set to semicolon ( ; ).
When the ID number, time and date are added at "Data output (
dout
)" of the function table,
outputs ID number, date, time and weighing data in this order and separates each item by a
comma and treats all the items as one group of data.
ID number
dout
5-id
on
The number to identify a specific balance.
This format consists of eight characters excluding the terminator.
Date
dout
5-td
2
or
3
The date output order can be changed in " Time/Date output (
5-td
)" .
The year is output in a four-digit format.
ID number
Date
Time
Weighing data
Stable header
Unstable header
Overload header
Header Data
Unit
Terminator
Data Terminator
2 0 1 5 / 0 9 / 0 1
CR LF
