Operators and Maintenance Manual
Display
EEM MOT 01 FL02.01
Page
13/16
Copyright:
Auto & Aero Technologies Sp. z o.o.
Mazowiecka 10/5, 20-723 Lublin, Poland
■
email: [email protected]
■
www.aatech.pl
Fig. 8. Indication of no connection to measurement modules
c)
In the case of the instrument’s failure or malfunction, turn power
off and on again.
d)
If the above does not solve the problem, the display needs to be
replaced.
e)
A defective instrument must not be used.
5.5. Repairs
Repairs and inspections of the instrument can be conducted only by its
manufacturer.
The display does not contain any user-serviceable parts. Unauthorized
repairs or modifications may result in permanent damage to the
equipment and void the warranty.
If the monitor fails, return the device to the Manufacturer with description
of the failure circumstances and symptoms.
5.6. Re-programming
Modifications to the instrument’s settings that are not possible to be
conducted by means of the encoder can be introduced by means of service
software provided by the Manufacturer and the dedicated diagnostic
interface.
The instrument’s firmware updates are to be conducted on the basis of the
bulletins published by the Manufacturer. The updates can be introduced
