Operators and Maintenance Manual
Display
EEM AM4 FE H01
Page
3/19
Copyright:
Auto & Aero Technologies Sp. z o.o.
Mazowiecka 10/5, 20-723 Lublin, Poland
■
email: [email protected]
■
www.aatech.pl
Introduction
This instrument is intended for ultralight, microlight, homebuilt and
experimental aircraft. The purpose of EEM AM4 type display is to present
key engine status information to the pilot. Version FE H01 displays engine
data (inlet air pressure and temperature, oil pressure and temperature,
engine and rotor speed, cylinder head temperature, exhaust gases
temperature, voltage, flight time, hobbs and number of recorded threshold
crossings).
The device is equipped with four an in-built colour displays protected by
anti-reflective coated glass. Four encoders knob & push-button are located
in the front provides user interaction with the device. The electric
connectors, hardware and software identification plates are located in the
back of the casing (Fig. 1)
Fig. 1. EEM AM4 Display
This instrument is not certified by the FAA and EASA. Fitting of this
instrument to certified aircraft is subject to the rules and conditions
pertaining to such in your country. Please check with your local aviation
authorities if in doubt.
