AALogic ST-101, Руководство пользователя

Страница: 6 / 17

2 Version 1.0.2
3 F
RONT
P
ANEL
The ST-101 main display is shown in the following picture.

The PWR/CLR on the lower left is used to Exit any screen or to turn the unit off.

Keys F1 , F2 , and F3 are screen dependent.
o
The F1 START key starts sending a signal at the currently set frequency.
o
The AUTO-SET key initiates an automatic setup feature. The ST-101 will scan the pair and
attempt to determine an optimum frequency and initial power LEVEL .

The FREQ key allows for frequency selection.

The LEVEL key is used to adjust the power output LEVEL when transmitting the signal.

The CFG key allows the user to set the CONTRAST , BACKLITE , and TONE mode options.

The Charger jack (12V) is used to charge the internal battery. Only use the supplied charger to
charge the ST-101 to avoid damage to the unit.

The CHGR lights above the display has a red light when the charger is connected. A green light is on
when the battery is charging.

The pair cord plugs in on the right side of the case as indicated on the front panel.