4
1. GETTING STARTED
To get your pedal up and running you need a standard 9V DC, 2.1 mm plug, center negative power
supply (minimum 250 mA). You will find the connector at the back of your pedal.
The pedal supports both mono and stereo connections. Combinations of these will lead to
different properties in the output signal. See the input/output setups section for further
explanations.
2. CONTROLS
TIME
Time between echoes
LEVEL
Adjusts the output level of your echo signal relative to the level of the
direct signal (0-‐100%)
FEEDBACK
Controls the number of echoes
FX SELECT/TAP TEMPO
Two modes:
-‐
TAP – tap the desired delay time using footswitch (TAP)
-‐
FX-‐SELECT – Choose active effect parameter (
TIME, LEVEL or
FEEDBACK
) for wireless control with AERO controller
(optional)
ON/OFF
Set the pedal to ON (activated) or OFF (true bypass).
