INSTRUCTION MANUAL
AAL Profiline Transmitter
HC-125-BA V0.01 Armbandsender Seite 4 von 4
HC-140-BA-EN V1.02 Transmitter
page 4 of 4
AAL
Homecare
Fon +49 (0) 2208 9339170 Fax +49 (0) 2208 9339063 www.aal-homecare.com
Battery replacement
Important
After each battery replacement call triggering and range have to be checked as during initial putting into
operation.
Description 2: Battery replacement
Assembly details
Description 3: Fit silicone seal
Fig. 3: Exploded view
1.
Open the hand transmitter according to the detailed description
in Fig. 3 and remove the transmitter assembly.
2.
Push the battery out of the holder using a
non-metal
pin and
replace it by a new one (Fig. 1).
3.
Continue according to Fig. 3 and Description 1.
Fig. 1: Battery replacement
Transmitter assembly
Battery holder Button cell, smooth side with
the + symbol facing upward
Fig. 2: Fit the silicone seal
Circumferential supporting edge
Press until the seal is circumferentially flush
Fig. 1: Insert the tactile disc
Press the tactile disc flush into
the groove of the silicone seal
Strap retaining
clips (on both
sides)
Case cover
Front insert
Silicone seal
Tactile disc
Transmitter assembly
(battery faces down)
Case bottom
Mounting screws
Module cap locking lugs
Case cover locking lugs
Transmitter assembly locking lugs in the
case bottom
Hole for case bottom locking lug
Front insert and case bottom locking lugs
