5
Mounting Options
Units are suspended and leveled with wire or threaded rod (supplied by others) using either hanging
tabs or mounting pads affixed to the housing. Another option is the use of Clean Ceiling Angles,
whereby the unit is cinched to the hard ceiling with hardware (supplied by others) from above.
Clean Ceiling Angles for AES Clean Ceiling
The AstroHood
™
unit is installed from the top side of the AES Clean Ceiling Grid using the Clean
Ceiling Angle flange hardware (supplied by others). The hardware is adjusted to secure the housing
to the ceiling by cinching the field-installed trim option to the underside of the hard ceiling. There
are four (4) clean ceiling flanges, with one (1) located on each side of the housing. The clean ceiling
angles are welded to the housing body and are of the same material as the housing. The AstroHood
unit should be leveled and secured to the ceiling per ceiling manufacturer recommendations.
The AstroHood trim should be sealed to the underside of the ceiling using RTV (Dow Corning 732 or
GE 102 is recommended). See Field-Installed Trim instructions.
Fig 04: Wire - Hanging Tabs
Fig 05: Rod – Mounting Pads
Fig 06: Clean Ceiling Angle Mount
