8
Quick Start Guide
1. Read and observe all safety and installation instructions provided in the Introduction and
Installation Instructions section of this document.
2. After completion of installation, turn on the power switch located on the back of the unit.
3. The unit is preset to 60% of maximum power.
a. If the installer would like to adjust the CFM settings, see the EC Motor Speed Adjustment
Section for details on how to make adjustments.
4. When the power cord is plugged into a wall receptacle and the power switch is ON, the control
panel (HMI) will sound an audible confirmation and illuminate.
5. The system starts with the fan in OFF position. To turn it ON, it is necessary to press the power
button (RED).
a. The EC motor may require time to get to full operating speed (RPM). If the installer does not
immediately detect the motor running upon turning the unit on, please allow 10 seconds for
the EC motor to get to full operating RPM.
QUICK START GUIDE & OPERATION
Important note:
For additional information about
controlling and set-up, see the Control Panel section.
