Aaeon VPC-5500S, Руководство пользователя

Страница: 95 / 102

Appendix C – Digital I/O Ports 82
Mo
bile
N
VR
VPC
-5500S
C.1 DI/O Programming
VPC-5500S utilizes FINTEK F81866 chipset as its Digital I/O controller. Below are the
procedures to complete its configuration. AAEON initial DI/O program is also attached
for developing customized program for your application.
There are three steps to complete the configuration setup:
(1) Enter the MB PnP Mode
(2) Modify the data of configuration registers
(3) Exit the MB PnP Mode. Undesired result may occur if the MB PnP Mode is not exited
normally.