Optional accessories
www.up-board.org /www.up-shop.org / www.up-community.org
Please read the following safety instructions carefully
It is advised that you keep this manual for future references
1. All cautions and warnings on the device should be noted.
2. Make sure the power source matches the power rating of the device.
3. Position the power cord so that people cannot step on it. Do not place anything over the power cord.
4. Always completely disconnect the power before working on the system’s hardware.
5. No connections should be made when the system is powered with a sudden rush of power as it may
damage sensitive electronic components.
6. If the device is not to be used for a long time, disconnect it from the power supply to avoid damage by
transient over-voltage.
7. Always disconnect this device from any power supply before cleaning.
8. While cleaning, use a damp cloth instead of liquid or spray detergents.
9. Make sure the device is installed near a power outlet and is easily accessible.
10. Keep this device away from humidity.
11. Place the device on a solid surface during installation to prevent it from falling.
12. Do not cover the openings on the device. This is to ensure optimal heat dissipation.
13. Keep an eye for high temperatures when the system is running.
14. Do not touch the heat sink or heat spreader when the system is running
15. Never pour any liquid into the openings. This could cause fire or electric shock.
16. As most electronic components are sensitive to static electrical charge, be sure to ground yourself
when installing internal components to prevent static charge. Use a grounding wrist strap and contain all
electronic components in any static-shielded containers.
17. If any of the following situations arise, please contact our service personnel:
I. Damaged power cord or plug
II. Liquid intrusion through the device
III. Exposure to moisture
IV. Device is not working as expected or in a manner as described in this manual
V. The device is dropped or damaged
VI. Any obvious signs of damage displayed on the device
18. Do not leave this device in an uncontrolled environment with temperatures beyond 60 °C. The
device's permitted storage temperatures are (-40°C ~ 80°C) in order to prevent damage.
This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received including interference that may cause undesired operation.
Caution: There is a danger of explosion if the battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer. Dispose of used batteries according to
the manufacturer’s instructions and your local government’s recycling or disposal directives.
Attention: Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte. Ne la remplacer
qu’avec le même modèle ou équivalent recommandé par le constructeur. Recycler les batteries usées
en accord avec les instructions du fabricant et les directives gouvernementales de recyclage.
FCC Statement
Regulatory
Safety Precaution
Component Name
Hazardous or Toxic Materials or Elements
Le
ad
(P
b)
M
erc
ury
(H
g)
Ca
dm
ium
(C
d)
He
xa
va
len
t
Ch
rom
ium
(C
r(V
I))
Po
lyb
rom
ina
ted
bip
he
nyls
(P
BB
s)
Po
lyb
rom
ina
ted
dip
he
nyl
eth
ers
(P
BD
Es
)
PCB and Components
0
O
O
O
O
O
Wires & Connectors for
Ext. Connections
0
O
O
O
O
O
CPU & RAM
X
O
O
O
O
O
Battery
X
O
O
O
O
O
This form is prepared in compliance with the provisions of SJ/T 11364.
O: The level of toxic or hazardous materials present in this component and its parts is below the
limit specified by GB/T 26572.
X: The level of toxic of hazardous materials present in the component exceed the limits specified
by GB/T 26572, but is still in compliance with EU Directive 2011/65/EU (RoHS 2).
Notes:
1. The Environment
Friendly
Use
Period
indicated
by
labelling
on
this
product
is
applicable
only
to use under normal
conditions.
2. Individual
components
including
the
CPU,
RAM/memory,
HDD,
optical
drive,
and
PSU
are optional.
3.
LCD Module and Touch Control Module only applies to certain products which feature
these
components
.
System
UP Xtreme
SoC
Intel® Core™ i7-8665UE ( up to 4.4 GHz)*
Intel® Core™ i7-8565U (up to 4.60 GHz)*
Intel® Core™ i5-8365UE ( up to 4.1 GHz)*
Intel® Core™ i3-8145UE ( up to 3.9 GHz)
Intel® Celeron 4305UE ( up to 2.0 Ghz)
*Intel AMT is only supported for i5 and i7
# of Cores
i3-8145UE/ Celeron 4305UE-Duo Core
i7-8665UE/i7-8565U/i5-8365UE-Quad Core
Graphics
Intel® UHD Graphics 610-Celeron 4305UE
Intel® UHD Graphics 620
VPU
optional ( via M.2 2280, mPCIe, 100-pin)
FPGA
Intel® FPGA Altera MAX 5
MCU
STM32
System memory
4GB DDR4
8GB DDR4
16GB DDR4
Storage capacity
64GB
Power requirement
12~60V DC-IN (lockable connector)
Product specifications
China RoHS Requirements
AI hardware accelerator
UP AI Core XM 2280
WiFi Bluetooth Connecvivity
M.2 Intel ® AC-9260 WiFi Kit
(802.11ac, bluetooth 5.0)
LTE Connectivity
mPCIe Quectel 4G LTE
CAT4 Global module
EG-25G
Copyright © 2019 AAEON Europe B.V. All rights reserved. UP is a registered trademark of AAEON Europe B.V. Specifications are subjective to change without
notice. Intel, Movidius and Myriad are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries. Other brands and product names are
trademarks or registered trademarks of their respective holder
