Quick Installation Guide
SBC-775 Installation Guide 7
SBC-775
ATX Power Control Connectors
(J7 and J1)
ATX feature connector (J7) and soft power
switch connector (J1)
The SBC-775 can support an advanced soft power switch function
if an ATX power supply is used. To enable the soft power switch
function:
1. Take the specially designed ATX-to-PS/2 power cable out of
the SBC-775's accessory bag.
2. Connect the 3-pin plug of the cable to J7 (ATX feature
connector).
3. Connect the power on/off button to J1. (A momentary type of
button should be used.)
Warnings: 1. Make sure that you unplug your power supply
when adding or removing expansion cards or
other system components. Failure to do so may
cause severe damage to both your CPU card and
expansion cards.
2. ATX power supplies may power on if certain
motherboard components or connections are
touched by metallic objects.
Important: Be sure that the ATX power supply can take at
least a 10 mA load on the 5 V standby lead
(5VSB). If not, you may have difficulty powering
on your system.
