Aaeon SBC-590 Скачать руководство пользователя страница 11

Страница: 11 / 59

SBC-590 User's Manual

Specifications

• CPU: Intel Pentium 75-200 MHz CPUs and other compatible CPUs at 66/

60/50/40 MHz (external clock speed)

• Bus interface: ISA and PCI (PC/AT) bus

• Data bus: 64 bit

• Processing ability: 64 bit

• Chipset: VT 82C575/82C576/82C577

• RAM memory: 1 MB to 128 MB. Uses four 72-pin SIMM sockets

supporting EDO RAM

• L2 Cache memory size: 256 KB/512 KB 2nd level cache memory

(Supports pipeline burst SRAM module)

• Shadow RAM memory: Supports system and video BIOS shadow

memory

• Display controller: SVGA, PCI-bus, ALG 2032 chipset with 1 MB shared

video memory. Provides 32-bit graphic through-put. Supports resolutions
up to 1280 x 1024 in 16 colors, 1024 x 768 in 256 colors,

• Feature connector: 26-pin header for external VGA Display

• Enhanced IDE hard disk: Fast PCI bus. Supports up to four enhanced

IDE (ATA-2)

• Driver interface: Large hard disk drives or other enhanced IDE devices.

Supports mode 3 and mode 4 hard disks (data transfer rate, minimum of
11.1 MB/sec)

• Floppy disk drive interface: Supports up to two floppy disk drives, 5.25"

(360 KB and 1.2 MB) and/or 3.5" (720 KB, 1.44 and 2.88 MB)

• Bidirectional parallel port: Configurable to LPT1, LPT2, LPT3 or

disabled. Supports SPP/EPP/ECP standards

• Serial ports: Two serial RS-232 ports; use 16C550 UARTs with 16-byte

FIFO buffer. Supports speeds up to 115 Kbps. Ports can be individually
configured from COM1 to COM4 or disabled.

• BIOS: Award BIOS

• Watchdog timer: Can generate a system reset or IRQ15. The time interval

is software selectable from 1 to 64 seconds.

Содержание SBC-590




























































Результаты поиска

Содержание SBC-590

Отзывы:

Бренды по названию

Популярные бренды

Aaeon SBC-590, Руководство пользователя

Результаты поиска

Содержание SBC-590

Отзывы:

Бренды по названию

Популярные бренды