manualshive.com logo in svg

Aaeon SBC-456, Руководство пользователя

Поделиться
Скачать
Aaeon SBC-456 Скачать руководство пользователя страница 83

Chapter 4  Flat Panel/CRT Controller    75

Windows

Ô

Ô

Ô

Ô

Ô

 NT 4.0

Driver Installation

1. Install Windows NT4.0 as you normally would for a VGA display.

First click the Start button, go to Settings and click on Control
Panel.  Choose the Display icon and click on the icon.  In the
Display Properties window, click on the Settings tab.  Then click
on Change Display Type.  In the Change Display Type window,
click on the Change button under Adapter Type.  This will bring up
the Select Device window.

2. Place the Windows

Ô

 NT Display Driver Diskette in drive A.  In

the Select Device window, click on Have Disk.  Press <ENTER>
and the name of the Chips and Technologies, Inc.  Video Control-
ler driver will appear highlighted in the Models list box.  Select
Chips and Tech. 65550 PCI (new) and Click OK to install the
selected driver.  Click OK to install the selected driver.

3. Once the installation is complete, the Change Display Type

window will reappear.  Click on Close to close the window.  Then
the Display Properties window will reappear.  Click on Apply.
Restart the system for new settings to take effect.

Содержание SBC-456



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды