Aaeon RTC-700B, Руководство пользователя

Страница: 23 / 64

Chapter 2 – Getting Started 11
Ru
gge
d T
abl
et Co
m
pu
te
r
RTC
-700
B
2.2 Notes Before Use
Before using your device, please read through the following instructions

Use only the power adapter that comes with your device. Using a different
power adapter may cause damage.

The AC cable is designed for the RTC-700B only

This product is intended to be supplied by a Listed Power Adapter or DC power
source, rated 12Vdc, 3A minimum, Tma = 40°C. Please contact AAEON for
further assistance.

Using a power outlet is the best way to charge your device (refer to section 1.2
for the adapter’s voltage output and acceptable input)

When using the device for the first time, fully charge the battery for up to 8
hours. If the device is inactive, charging the battery once per month is
recommended to prevent deterioration.

There are two batteries in the RTC-700B: Battery 1 is internal while battery 2 is
swappable by the user (both batteries can be monitored at the title bar). Charge
the device once battery 1 drops below 20%

Always allow your battery to be fully charged before use. Calibrating the battery
before use is also highly recommended.

To prolong battery life, allow a fully charged battery to discharge more than
95% before recharging

Ensure that the battery cover is properly secured by manually pushing the pin to
lock position.

The RTC-700B CANNOT be charged via an USB connection.

The IP65 waterproof protection may get damaged when subjected to shocks
greater than levels tested in MIL-STD-810G Method 516.6 Procedure IV. The
protection may also be affected if the rubber connector fails to cover or close
firmly.