![background image](http://html1.mh-extra.com/html/aaeon/raptor-microatx/raptor-microatx_installation-manual_3348960017.webp)
Chapter 1: Pre-Configuration
7
SER C and SER D RS-422/485 Termination
Resistor Option (Optional Feature)
The switch SW1 allows the insertion of the termination resistors in the
Receiver and Transmitter lines of the Serial C and Serial D when
operating in RS-422/485 mode.
Table 1-6 SER C RS-422/485 Tx Termination Resistor Selection
SER C RS-422/485 Tx
Termination Resistor
On
Off
SW1 - 1
On
Off*
* Manufacturer's Settings.
Table 1-7 SER C RS-422/485 Rx Termination Resistor Selection
SER C RS-422/485 Rx
Termination Resistor
On
Off
SW1 - 2
On
Off*
* Manufacturer's Settings.
Table 1-8 SER D RS-422/485 Tx Termination Resistor Selection
SER D RS-422/485 Tx
Termination Resistor
On
Off
SW1 - 3
On
Off*
* Manufacturer's Settings.
Table 1-9 SER D RS-422/485 Rx Termination Resistor Selection
SER D RS-422/485 Rx
Termination Resistor
On
Off
SW1 – 4
On
Off*
* Manufacturer's Settings.
Содержание Raptor MicroATX
