Aaeon PCM-6894, Руководство пользователя

Страница: 29 / 70

C o m p a c t B o a r d P C M - 6 8 9 4
Chapter 2 Quick Installation Guide
2 - 14
2.15 CRT Connector (CN2)
PCM-6894 can simultaneously support CRT and flat panel display.
And the pin assignment of CRT connector is listed as below.
Pin Signal Pin Signal
1 RED 9 N.C.
2 GREEN 10 GND
3 BLUE 11 N.C.
4 N.C. 12 DAT
5 GND 13 HSYNC
6 GND 14 VSYNC
7 GND 15 DCLK
8 GND 16 GND
2.16 LVDS Connector (CN3)
When PCM-6894 power is applied, the control signal is low until the
relevant flat panel signals are present. The configuration is done
completely via the software utility. You don’t need to set any jumper.
Pin Signal Pin Signal
1 TX1+ 2 TX1-
3 GND 4 N.C.
5 TXCLK+ 6 TXCLK-
7 GND 8 N.C.
9 VCC 10 VCC
11 TX2+ 12 TX2-
13 GND 14 GND
15 TX0+ 16 TX0-
17 TX3+ 18 TX3-
19 ENBKL 20 GND