8 6
PCM-5894/5892 User Manual
OS/2
These drivers are designed to function with OS/2 Versions 4.0, 3.0, and
2.11 operating systems.
To install this driver, do the following steps:
1. Open an OS/2 full screen or windowed session.
2. Place the 65554 Display Driver diskette in drive A.
3. At the OS/2 command prompt, type the following commands to
copy the files to the OS/2 drive:
Type A:<ENTER> to make this default drive.
Type SETUP A: C:<ENTER>
Where A: is the floppy disk drive and
C: is hard disk partition containing OS/2
When the Setup Program is completed, you will need to perform a
shutdown and then restart the system in order for changes to take
effect.
A log of the information output during the install can be found
in <root>:\OS2\INSTALL\DISPLAY.LOG
4. After restarting the system, perform the following steps:
1. Open the OS/2 System folder.
2. Open the System Setup folder.
3. Open the Display Driver Install Object.
Содержание PCM-5894
