manualshive.com logo in svg

Aaeon PCM-5335, Руководство пользователя

Поделиться
Скачать
Aaeon PCM-5335 Скачать руководство пользователя страница 2

Copyright notice

This document is copyrighted, 2001, by 

AAEON

 Co., Ltd. All rights

are reserved. The original manufacturer reserves the right to make
improvements to the products described in this manual at any time
without notice.

No part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the original
manufacturer assumes no responsibility for its use, nor for any
infringements upon the rights of third parties which may result from its
use.

Acknowledgements

AMD is a trademark of Advanced Micro Devices, Inc.
Award is a trademark of Award Software International, Inc.
Cyrix is a trademark of Cyrix Corporation.
IBM, PC/AT, PS/2 and VGA are trademarks of International Business
Machines Corporation.
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows

®

 is a registered trademark of Microsoft Corp.

RTL is a trademark of Realtek Semiconductor Co., Ltd.
C&T is a trademark of Chips and Technologies, Inc.
UMC is a trademark of United Microelectronics Corporation.
Winbond is a trademark of Winbond Electronics Corp.
STPC is a trademark of SGS Thomson Corp.

For more information on this and other 

AAEON

 products, 

or technical

supportand service , please 

visit our website at: 

                     

http://www.aaeon.com.tw

This manual is for the PCM-

5

335

 

.

Part No. 20

8

7533500

1st  Edition  Printed in Taiwan  

December

 2001

Содержание PCM-5335































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды