Aaeon MIX-Q370A2, Руководство пользователя

Страница: 22 / 48

MIX-Q370A2
2-14
5. AT/ATX mode selection (3-pin ATX_AT)
Pins
ATX mode (Default) 1-2
AT mode 2-3
Pins
1-2 Enables the chassis intrusion detection feature
3-4 Disables the chassis intrusion detection feature
(Default)
4. Chassis intrusion jumper (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch.
Connect one end of the chassis intrusion sensor or switch cable to this
connector. The chassis intrusion sensor or switch sends a high-level signal to
this connector when a chassis component is removed or replaced. The signal
is then generated as a chassis intrusion event.
Move the jumper cap to pins 1-2 when you intend to use the chassis intrusion
detection feature.
MIX-Q370A2
2 1 2 3
ATX mode
(Default)
AT mode
ATX_AT
MIX-Q370A2
Chassis Intruder -Unused
Chassis Intruder - Unused
Chassis Intruder - Used
PIN1
CHASSIS