MAX-H310A
2-14
4.
Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch.
Connect one end of the chassis intrusion sensor or switch cable to this
connector. The chassis intrusion sensor or switch sends a high-level signal to
this connector when a chassis component is removed or replaced. The signal
is then generated as a chassis intrusion event.
By default, the pin labeled “Chassis Signal” and “Ground” are shorted with
a jumper cap. Remove the jumper caps only when you intend to use the
chassis intrusion detection feature.
MAX-H310A Chassis intrusion connector
+5VSB_MB
Chassis Signal GND
CHASSIS
MAX-H310A COM1 Ring/+5V/+12V Selection
COM1_VSET
2
1
4
3
6
5
+12V
+5V
Ring
(Default)
5.
COM1 Ring/+5V/+12V selector (6-pin COM1_VSET)
Setting
Pins
+12V
1-2
+5V
3-4
Ring (Default)
5-6
Содержание MAX-H310A
Страница 1: ...Industrial Motherboard MAX H310A...
Страница 16: ...2 9 Chapter 2 Motherboard information A B B A To uninstall the CPU heatsink and fan assembly 2 1...
Страница 18: ...2 11 Chapter 2 Motherboard information 3 To remove a DIMM A B...
Страница 49: ...A 2 MAX H310A Pb Hg Cd Cr VI PBB PBDE SJ T 11363 2006 SJ T 11363 2006 2002 95 EC...