manualshive.com logo in svg

Aaeon Gene-4310, Руководство пользователя

Поделиться
Скачать
Aaeon Gene-4310 Скачать руководство пользователя страница 53

Chapter 3  Award BIOS Setup    43

If you do not want to select drive type AUTO, other methods of
selecting the drive type are available:

1.Match the specifications of your installed IDE hard drive(s) with
   the preprogrammed values for drive types 1 through 45.

2.Select USER and enter values into each drive parameter field.

3.Use the IDE HDD AUTO DECTECTION function in Setup.

Here is a brief explanation of drive specifications:

•Type: The BIOS contains a table of pre-defined drive types. Each

          defined drive type has a specified number of cylinders,

              number of  heads, write precompensation factor, landing
             zone, and number of sectors. Drives whose specifications
             do not accommodate any pre-defined type are classified as
              type USER.

•Size:   Disk drive capacity (approximate). Note that this size is
             usually slightly greater than the size of a formatted disk
             given by a disk-checking program.

• Cyls: Number of cylinders

• Head: Number of heads

• Precomp: Write precompensation cylinder

• Landz: Landing zone

• Sector: Number of sectors

• Mode: Auto, Normal, Large, or LBA

- Auto: The BIOS automatically determines the optimal mode.
- Normal: Maximum number of cylinders, heads, and sectors

    supported are 1024, 16, and 63.

   - Large: For drives that do not support LBA and have more than
                    1024 cylinders.

Содержание Gene-4310
























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды