12. Digital I/O connector (10-pin DIO1)
This connector includes 8 I/O lines (In/Out programmable). All of the Digital
I/O lines are programmable and each I/O pin can be individually programmed
to support various devices.
NOTE:
To configure the I/O pins in BIOS, go to the
Advanced
tab >
Digital
IO Port Configuration
>
DIO Port 1~8
. See section
3.3.8 Digital IO Port
Configuration
for details.
13. SATA power connector (4-pin SATA_PWR1)
This connector is for the SATA power cable. The power cable plug is
designed to fit this connector in only one orientation. Find the proper
orientation and push down firmly until the connector completely fit.
14. Backlight inverter power connector (5-pin INV1)
Connect the backlight inverter power cable to this connector.
NOTE:
The backlight inverter power cable is purchased separately.
EMB-BSW1
EMB-BSW1 DIO connector
PIN 1
DIO1
+5V
DIO_P#7
DIO_P#5
DIO_P#3
DIO_P#1
GND
DIO_P#8
DIO_P#6
DIO_P#4
DIO_P#2
EMB-BSW1
EMB-BSW1 SATA power connector
+5V GND GND +12V
SATA_PWR1
EMB-BSW1
EMB-BSW1 Inverter connector
BLDN#_R
BLUP#_R
GND
GND
+BLVCC
+BLVCC
VCON
INV_ENABKL
PIN1
INV1
EMB-BSW1
2-16
