background image

R o b u s t   P a n e l   P C  

A P C - 8 1 2 2

 

 

          i 

 

Copyright Notice 

This document is copyrighted, 2007. All rights are reserved. The 
original manufacturer reserves the right to make improvements to 
the products described in this manual at any time without notice. 

No part of this manual may be reproduced, copied, translated, or 
transmitted in any form or by any means without the prior written 
permission of the original manufacturer. Information provided in 
this manual is intended to be accurate and reliable. However, the 
original manufacturer assumes no responsibility for its use, or for 
any infringements upon the rights of third parties that may result 
from its use. 

The material in this document is for product information only and is 
subject to change without notice. While reasonable efforts have 
been made in the preparation of this document to assure its 
accuracy, AAEON assumes no liabilities resulting from errors or 
omissions in this document, or from the use of the information 
contained herein. 

AAEON reserves the right to make changes in the product design 
without notice to its users. 

Содержание APC-8122 Series























































Отзывы: