Aaeon AEC-VPMS-200, Руководство пользователя

Страница: 6 / 20

P o w e r M a n a g e m e n t K i t A E C - V P M S - 2 0 0
v
UNIT has unusual high-temperature phenomenon, please
hand it over to the dealer.
8. If there is any questions, please contact with AAEON dealer
or service center.
Procedures of turning on the POWER MANAGEMENT UNIT:
1. First of all, connecting the recharged connector of the
POWER MANAGEMENT UNIT to charger in vehicle.
2. Connecting battery connector of the POWER
MANAGEMENT UNIT to vehicle battery, and the POWER
MANAGEMENT UNIT will be turned on automatically.
3. The POWER MANAGEMENT UNIT begins to output
voltage and LED indicators will be illuminated in green 10
seconds later.
Note: the delay time of output voltage is adjustable and the
default is 10 seconds.
4. If the green LED of the POWER MANAGEMENT UNIT
does not illuminated in 10 seconds, it means that the
POWER MANAGEMENT UNIT works abnormally.
Please refer to the bullet 2 of Attention for troubleshooting.
Function explanation:
1. Before you start up the POWER MANAGEMENT UNIT,
you have to connect the vehicle battery and generator first.
Make sure all cables have been connected properly. The
POWER MANAGEMENT UNIT will be turned on