AAD S-1, Информация владельца

Страница: 7 / 13

Functions and Connections
Please refer to rear panel of the subwoofer (Fig.2) for functions on the amplifier.
Power switch on/off
Upper position: Power on
Lower position: Power off
Middle position: Auto on
At this position the subwoofer amplifier is in a stand by mode, awaiting an input
signal. When there is no signal, the amplifier is shut down. As soon as the signal
appears, the amplifier switches on. If signal is absent, the amplifier will shut
down automatically after a pre-determined period of time. The power indicator is
red when the switch is at OFF position, and green when the switch is at ON or
AUTO position.
Volume Control
Use this control to balance the level of the woofer with the level of your main
speakers.
Crossover frequency control
bass will appear boomy due to outputs of subwoofer and main speakers
overlapping each other. If it is set too low, the bass will be ill defined and the
subwoofer will sound detached from the rest of the system.
Fig. 2
-6-