Step 2
Open the chair to the position shown above.
Attach the arm to the center crosspiece on the
back using one (G) bolt on either side.
NOTE: The arm needs to be attached with the half
moon cutout facing in towards the seat. (Please see
photo of chair on the front page)
Step 3
Attach the front leg crosspiece to the legs using four
(E) wood screws.
NOTE: The legs have pre-drilled pilot holes.
Step 1
Long
Bolt (G)
Attach the front leg to the seat using one (F) bolt on
either side.
Short
Bolt (F)
