Ⅲ
.Panel function description
Ⅳ
.Instructions
1. Use AC power supply (UPS function)
When the mains power is normal, the mains powers the equipment and charges the product at the same time.
(Picture C) In the event of a sudden power failure, the internal battery of the product will be automatically switched
to supply power to the device in an instant.
2. Use DC power supply and lighting
3. Use AC to charge
4. Use DC/solar charging
When using DC/solar charging, make sure that the charging voltage matches the product. Then insert a suitable DC
charging cable into the photovoltaic input port. At this time, the LCD screen battery percentage flashes up and down,
indicating that it is charging. When the battery level shows 100% and stops flashing, it means the system is fully
charged.
TV
electrical appliances
charger
Battery
Running on normal AC power
Inverter
√
Inverter
TV
electrical appliances
charger
Battery
Over/Unde-Voltage or power loss
Inverter
×
( Picture C)
Inverter
Back panel(Picture B)
Cooling fan
AC input socket
Battery voltage
AC output voltage
AC output frequency
AC output power
UPS/Mians mode
Battery power
DC/USB Output
LCD display
Flashlight
Light switch
USB, DC12V switch
USB 5V-2.1A
QC3.0 Double QC USB
DC12V-3A ,DC5.5-2.1 interface
DC12V-3A ,DC5.5-2.1 interface
Solar input DC5.5-2.1 interface
Front panel(Picture A)
LCD display
AC output switch
AC output socket 1
AC output socket 2
As shown in Picture C, when the product is used as a UPS, insert the AC input cord plug into the household AC
outlet. Plug the other end into the AC input socket of the product, and then plug the power cord of the electrical
appliance into the AC universal socket of the product. At this time, the AC mains power supplies the electrical
appliances and charges the internal battery pack. Turn on the AC output switch of the system to be used as UPS.
At this time, the LCD screen displays icons, and when the power is suddenly cut, it will automatically
switch to the internal battery of the product to supply power to the load. When used as a UPS, the total power of
electrical appliances should not exceed the maximum output power of the machine itself. When using super
power, it will cause the fuse that comes with the machine to blow, replace one and it can be used normally.
UPS
3
4
5
When using the DC power supply function, please turn on the DC switch. The icon on the LCD screen
indicates that the DC/USB is normally output. When not in use, the switch should be turned off to reduce power
consumption of the battery pack. Please turn on the light switch when using LED lighting. The flashlight has 3
brightness modes: 100%, 50%, and burst flash.
DC/USB
When using AC power to charge, please plug a suitable AC charging cable into an AC input socket. The LCD screen
has display icons. At this time, the system enters UPS/mains charging mode. When the system is charging,
the LCD screen's battery percentage flashes up and down. When the battery level shows 100% and stops flashing,
the charging is complete.
UPS
