AA RoadPatrol 3823, Инструкция по эксплуатации

Страница: 7 / 15

Vehicle Installation - Position & Power Notes On Positioning the Dash Cam
4. Positioning & Powering the Dash Cam
12/24V dc
Plug the power cable into the 12-24V dc outlet of your vehicle.
The Dash Cam will automatically power on and start recording
once power is available. In some vehicles this will be when
connections are made, for others the Dash Cam will power
on once the ignition has been turned on.
Route the power cable around the windshield to the 12-24V dc
outlet, ensuring that your view is not obstructed, and that the
cable is not a distraction.
Positioning the Dash Cam behind the rear view mirror as per
the illustration is recommended.
Do NOT mount the Dash Cam in front of the driver, as
depicted by the red area in the illustration.
4
• When installing the Dash Cam , always place the device
securely against the windscreen and where possible,
conceal the power cable under trim to avoid distractions.
• Ensure the Dash Cam power cable does not interfere with
the drivers operating controls, such as the steering wheel,
pedals or gear levers.
• Do NOT mount the Dash Cam in front of an air-bag
deployment zone or in a position which obstructs any
mirrors.
• Do NOT operate the Dash Cam whilst driving. The Dash Cam
automatically begins recording when the vehicle’s ignition is
switched on and turns off when the vehicle’s ignition is
switched off.
12 11
• Adjust any settings or review recordings whilst stationary,
not whilst driving.