W
ARNING!
P
RODUCT DESCRIPTION
Read, understand and follow all warnings and instructions before using this product. Failure to follow these directions
may result in property damage, serious bodily injury, and/or death. AA Products Inc. is not responsible for any property
damage, personal injury, or death occurred while using any AA-Racks products. Retain these instructions for future
reference.
Any modification or unintended use of this product voids any warranty and could create a hazardous condition.
Loads must be secure according to local height and deification regulations and or laws.
Secured loads and connections must be re-checked periodically for tightness.
In order to prevent installation problems, any consultation or use of certified installer or installation service company
is recommended.
T
his is a universal basic pick-up truck rack for ladder, lumber, kayak utilities.
This rack set has been stationary weight-tested with 400Lbs ( Each Bar ). It features the extendable cross-bar design
which makes it compatible with a variety different truck models. This unit is Powder-coated with weather resistant
paint. Built to work & last.
We offer three different of truck ladder racks for different customers’ need:
X35-A: Single Bar Extendable Pick-up Truck Ladder Rack.
X35: 800LB Capacity Extendable Truck Ladder Rack.
X35+8CLAMP: It also comes with eight aluminum C-clamps for non-drilling installation. ( The No-Drilling assembly
method please refer to C-Clamp Mounting Installation )
I
NSTALLATION INSTRUCTION
ASSEMBLING THE RACK:
Install one set of the rack for positioning: connect the cross-bar with a pair of T-bars forming a top section, connect the top
section with a pair of upright poles, DO NOT tighten any hex-nuts on the T-bars.
MOUNTING INSTALLATIONS:
X35 series provides flexible installations that customers can freely choose one of the followings, feel free to consult us if you
need any assistance.
1. Direct Bolt-on Installation( FOR MODEL: X35-A / X35 ):
Set position for the mounting plates by putting the single bar set onto your truck bed; mark the drilling holes with a
marker on the bed-rail; drill the holes out. Repeat this for the other side.
Set bolts, nuts and washers (two for each mounting plate), after tightening one side of the mounting plate, make sure the
rack is aligned before tightening the other side.
After bolting all mounting plates, adjust the middle cross-bar, make sure it has equal range sleeved inside both T-bars,
tighten all the hex-nuts on the T-bars using the Allen-wrench provided, you are now done!
2. C-CLAMP Mounting Installation
(
FOR MODEL: X35+8CLAMP----
The C-Clamps installation might be limited due to
different bed-rail structures varied from different Make & Models, cutting of bed-liners might be required for C-clamp
Mounting installation)
:
Clean bedrails. Put the rack set onto the vehicle’ s truck bed. Install the semi-assemble rack set on the truck bed with
C-Clamps ( two for each ). Make sure both uprights aligned then tighten all the bolts for security. Repeat procedure for
other semi-assemble rack set .
Check all mounting hardware to insure tightness, you are now done!
I
NSTRUCTION MANUAL
AAPRODUCTS INC.
F
or Technical Support Call:1-888-806- 3972 / 626-332-4245
