I
NSTRUCTION MANUAL
AAPRODUCTSINC
F
or Technical Support Call:1-888-806-3972 / 626-332-4245
W
ARNING!
P
RODUCT DESCRIPTION
Read, understand and follow all warnings and instructions before using this product. Failure to follow these directions
may result in property damage, serious bodily injury, and/or death. AA Products Inc. is not responsible for any property
damage, personal injury, or death occurred while using any AA-Racks products. Retain these instructions for future
reference.
$Q\PRGLͤFDWLRQRUXQLQWHQGHGXVHRIWKLVSURGXFWYRLGVDQ\ZDUUDQW\DQGFRXOGFUHDWHDKD]DUGRXVFRQGLWLRQ
/RDGVPXVWEHVHFXUHDFFRUGLQJWRORFDOKHLJKWDQGGHLͤFDWLRQUHJXODWLRQVDQGRUODZV
Secured loads and connections must be re-checked periodically for tightness.
,QRUGHUWRSUHYHQWLQVWDOODWLRQSUREOHPVDQ\FRQVXOWDWLRQRUXVHRIFHUWLͤHGLQVWDOOHURULQVWDOODWLRQVHUYLFHFRPSDQ\
is recommended.
AAP
T
KLVLVDXQLYHUVDOEDVLFSLFNXSWUXFNUDFNIRUODGGHUOXPEHUND\DNXWLOLWLHV
This rack set has been stationary weight-tested with 800lb loads. It features the extendable cross-bar design which
PDNHVLWFRPSDWLEOHZLWKDYDULHW\GLIIHUHQWWUXFNPRGHOV7KLVXQLWLV3RZGHUFRDWHGZLWKZHDWKHUUHVLVWDQWSDLQW%XLOW
to work & last.
Model Number: X31 / X31-A ( BLK & WHT )
800LB Capacity Extendable Truck Ladder Rack
I
NSTALLATION INSTRUCTION
1.Install one set of the rack for positioning: connect the cross-bar with a pair of T-bars forming a top section, connect the
top section with a pair of upright poles, DO NOT tighten any hex-nuts on the T-bars.
2.Set position for the mounting plates by putting the single bar set onto your truck bed; mark the drilling holes with a
marker on the bed-rail; drill the holes out. Repeat this for the other side.
3.Set bolts, nuts and washers (two for each mounting plate), after tightening one side of the mounting plate, make sure the
rack is aligned before tightening the other side.
$IWHUEROWLQJDOOPRXQWLQJSODWHVDGMXVWWKHPLGGOHFURVVEDUPDNHVXUHLWKDVHTXDOUDQJHVOHHYHGLQVLGHERWK7EDUV
WLJKWHQDOOWKHKH[QXWVRQWKH7EDUVXVLQJWKH$OOHQZUHQFKSURYLGHG
