P
RECAUTIONS
The use air impact tools can over-torque fasteners and cause fastener
failure!
CAUTION
To avoid damaging the vehicle always use drill stops when drilling any
installation holes!
CAUTION
All installation holes should be sealed with silicon or Butyl sealant to prevent
exhaust fumes from entering the vehicle!
CAUTION
Inspect for fuel tank,fuel lines, brake lines, high voltage batteries and
electrical lines prior to drilling to avoid damaging critical vehicle systems or
injury to installer during installation process!
CAUTION
IMPORTANT WARRANTY REQUIREMENTS
THE BASIC TOOLS NEEDED FOR MOST INSTALLATIONS
Substituting AAPRODUCTS INC. specified fasteners for assembly and/or installation will void your product warranty.
All holes drilled into vehicle should have the raw metal edges sealed with a self-etching primer to resist corrosion
and potential fastener point failure.
These instructions should be kept with the vehicle.
Additional tools may be needed for this installation and they will be identified in the steps that follow.
DRILL
DRILL BIT
WITH STOP
RATCHET, SOCKETS
AND / OR WRENCHES
CROSS SCREWDRIVER
MEASURING TAPE
I
NSTRUCTION MANUAL
AAPRODUCTS INC.
F
or Technical Support Call:1-888-806- 3972 / 626-332-4245
