I
NSTALLATION DIAGRAM
S
TEP 1
S
TEP 2
T
here are 3 factory mounting location with tape over it underneath your vehicle. We need to remove the factory tape at each
location. Locate and align brackets base on the following diagram.
DRIVER SIDE
Front Bracket
FIG1
PASSENGER SIDE
DRIVER SIDE
D
river side-Front Mounting Bracket location. There two holes, only use the holes on the right toward the front of the vehicle.
Insert clip and you will be able to bolt on bracket.
( See. Fig 1 );
Place bracket over Nut Clip and attach with Hex Head Bolt M10(M10) with Washer(M10) & Spring Washer(M10).
( See. Fig 2 )
D
river side-Center Mounting Bracket location.(
See. Fig 3
)
Insert Clip and bolt bracket on. (
See. Fig 4
)
Nut-Clip
Washer M10
&
Spring Washer M10
&
Hex Head Bolt M10
FIG2
Nut-Clip
FIG3
FIG4
Center Bracket
Washer M10
&
Spring Washer M10
&
Hex Head Bolt M10
FRONT
REAR
FRONT
REAR
I
NSTRUCTION MANUAL
AAPRODUCTS INC.
F
or Technical Support Call:1-888-806- 3972 / 626-332-4245
